Bridgeport Table T Slot Size
Maximum Table Capacity 300 lbs. T-slots (3) @ 2.5 in. Cntr T-slot Size.625 in. SPINDLE; AC spindle motor (continuous) 2 hp. Bridgeport EZ PLUS Miller by Hardinge. Here you can find our T-slot plates produced from steel and cast aluminum, and accessories such as clamps and T-slot nuts. Cast aluminum T-slot plates: Tolerance/Precision: +/- 0.01 mm /200 mm Steel (C45) T-slot plates: Tolerance/Precision: +/- 0.05 mm /200 mm. I'm laying out a fixture here at work for use on a standard 9x42 Bridgeport Mill table. I don't have a mill handy to meaure, so I thought I'd ask favor. Can someone provide me with the width and spacing of the T-slots on the table? I need the center to center spacing of each slot and the distance from the edge (forward or back) of the table. Table: Working surface: 860 x 320mm T slots: 3 on 111mm centres T slot size: 15.9mm Max table load evenly distributed: 136kg Spindle: DC motor spindle drive giving 2.2kw (3hp) at 580 prm and 4.4kw (6hp) at 1160rpm Spindle range: 40-4000rpm Spindle speed control: Direct command Spindle throat distance: 368mm Nose to table: min: 127mm max: 492mm.
Bridgeport Table Slot Size
Bridgeport Table T Slot Sizes
For more information call +1 (818) 465-6700 or contact us
New early 1980's
SPECIFICATIONS:
Table size ..................... 9' x 42'
Number of T Slots .............. 3
Longitudinal table travel ...... 30'
Cross travel ................... 12'
Quill travel ................... 5'
Knee travel .................... 16'
Ram travel ..................... 12'
Distance, spindle to table ..... 18 1/2' - 2 1/2'
Distance, spindle to column .... 18 3/4' - 6 3/4'
Head tilt, left & right ........ 90 degrees
Head tilt, front & rear ........ 45 degrees
Spindle speeds - inf variable .. 60 - 4200 RPM
Spindle motor .................. 2 HP
Spindle taper .................. R-8
Max. collet capacity ........... 3/4'
Quill feeds .................... 0.0015', .003', .006'
Approx weight .................. 2000 lbs
EQUIPPED WITH:
Power feed on X axis
Inspect in the L.A. area
New early 1980's
SPECIFICATIONS:
Table size ..................... 9' x 42'
Number of T Slots .............. 3
Longitudinal table travel ...... 30'
Cross travel ................... 12'
Quill travel ................... 5'
Knee travel .................... 16'
Ram travel ..................... 12'
Distance, spindle to table ..... 18 1/2' - 2 1/2'
Distance, spindle to column .... 18 3/4' - 6 3/4'
Head tilt, left & right ........ 90 degrees
Head tilt, front & rear ........ 45 degrees
Spindle speeds - inf variable .. 60 - 4200 RPM
Spindle motor .................. 2 HP
Spindle taper .................. R-8
Max. collet capacity ........... 3/4'
Quill feeds .................... 0.0015', .003', .006'
Approx weight .................. 2000 lbs
EQUIPPED WITH:
Power feed on X axis
Inspect in the L.A. area